01
Call and Diagnose
You call, we ask which fixtures are backing up and whether it is one sink or the whole house. That tells us branch line versus main sewer. We give you a window, usually same-day, and a price range before we roll a truck.
02
Inspect the Line
On arrival we check the cleanouts, pull the trap where accessible, and run a leak detection camera down the line on main-sewer calls. Seeing the blockage, whether it is grease, roots, or collapsed pipe, means we choose the right tool instead of guessing. This step takes 15 to 30 minutes.
03
Clear the Blockage
We run a drain snake or RIDGID auger through branch lines and a hydro jetter on grease-heavy or root-intruded mains. Water pressure on a jetter runs 3,000 to 4,000 PSI, which scours the pipe wall instead of just punching a hole through the clog. Most clears take one to three hours.
04
Test and Verify
We fill the fixture and watch it drain, then run the camera back down on main-line jobs to confirm the pipe is clean and intact. If we find a cracked section or root intrusion that snaking will not fix, you hear it from us on the spot, not after the bill.
05
Clean Up and Advise
Drop cloths come up, the work area gets wiped down, and we walk you through what caused the clog and how to keep it from returning. You get a straight answer on whether the line needs a follow-up, a repair, or nothing at all.